Motorcycle Special Offers

Detailing

Motorcycle Detailing Deal £99 with any full or major service!

HERE IS WHAT IS INVOLVED:

  • Wash and de-grease using ph neutral shampoo snow foam.
  • Clay bar tank, fairing panels to gently remove any ground in dirt.
  • Remove fairings, hand wash engine & panels.
  • Dry with warm air & microfiber towel.
  • Remove seat & panels
  • Dry clean & re-seal all electrical connections.
  • Polish exhaust system to remove oxidisation. (Acid clean & re-polish if required).
  • Remove wheels to gain access. Clay, polish & seal wheels, shock absorber’s & underside of mudguards.
  • Wet flat & polish headlight (plastic) to remove chips & yellowing.
  • Plastic polish to screen if fitted.
  • Detail engine, frame & swing arm.
  • Polish & seal all wheels & calipers.
  • Polish inside all panels & seal by hand with nano protection.
  • Coat all surfaces with nano spray sealant
  • Refit wheels, clean & re-grease chain. Check & adjust chain & tyre pressures.
  • Refit fairings.
  • Paint correction to all painted surfaces.
  • Paint cleaner, nano polish & nano sealant applied by hand.

A full motorcycle detail  can take between 2-4 hrs, depending on the motorcycle & it’s condition.

Motorcycle Machine Detail £99 (RRP £140)

Motorcycle Service

  • Interim service  From £60 (dependant on the CC, make & model of the motorcycle)
  • oil & filter replacement
  • check tyre pressures/tread
  • check coolant levels
  • clean/check/adjust chain
  • check lights
  • adjust & lubricate cables
  • check brake components/fluid levels
  • lubricate all moving parts
  • nut & bolt/headstock/wheels/bearings, etc check.
  • battery voltage check

 

  • Full service From £120 (dependant on the CC, make & model of the motorcycle)
  • oil & filter replacement
  • air filter
  • check tyre pressures/tread
  • check coolant levels
  • clean/check/adjust chain
  • check lights
  • adjust & lubricate cables
  • check brake components/levels
  • strip & clean brake calipers
  • replace brake fluid
  • replace brake fluid lubricate all moving parts
  • nut & bolt/headstock/wheels/ bearings, etc check
  • replace plugs
  • battery voltage check

 

  • Major service From £250 (dependant on the CC, make & model of the motorcycle)
  • valve clearance check (If clearances need adjusting, additional costs may be incurred. We would only carry out the full clearance adjustment with your authorisation)
  • throttle bodies/carb balance
  • TPS set up
  • oil & filter replacement
  • air filter replacement
  • fuel filter replacement
  • check coolant levels
  • replace all fluids
  • clean/check/adjust/re-grease chain
  • check lights
  • check tyre pressures/tread
  • adjust & lubricate cables
  • check brake components/levels
  • check condition of brake pads (If upon inspection the pads needs replacing, we will advise prior to purchase & replacement. This will incur an additional parts charge if these need to be purchased.)
  • strip & clean brake calipers
  • replace brake fluid
  • replace brake fluid lubricate all moving parts
  • nut & bolt/headstock/wheels/ bearings, etc check
  • headstock bearing strip, clean & re-grease
  • replace plugs
  • battery voltage check
  • shock linkage re-grease

Every motorcycle is road tested before & after works are completed and given a full assessment. Batteries are checked throughout the service procedure. Any advisories are indicated on the invoice.

Security offers

Faulty alarm removal from £75.
Removal is FREE if upgrading to new Datatool S4 or Datatool TrakKING System.

DATATOOL S4 removed.
DATATOOL S4 removed.
DATATOOL S4 Red motorcycle alarm
DATATOOL S4 Red motorcycle alarm.

 

Contact Daniel Morris – Master Technician on 01243 576 212 / 07899 654446 or contact us through our contact page.

Snow foam cleaner to start the detailing process
Snow foam cleaner to start the detailing process
2-4 hours later & the Kawasaki gleams.
2-4 hours later & the Kawasaki gleams.